Branch Office
If you delpoy VC110 in the branch office, do one of the following to deploy it:
Option1: Deploy the VC110 following the same steps as for the head office. In this way, both inbound and outbound calls
will be available.
Option2: Deploy the VC110 using an intelligent firewall, which means that plug and play is possible without any further
firewall configuration, but only outbound calls are available.
Please note that when the VC110 is deployed with an intelligent firewall, you have to open ports (as shown below)
permission if they are restricted
It is recommended that you forward the web management port(443/TCP) to the public network, so that the head
office can remotely manage the branch office.
PortFunction
H.323 signal port
SIP（ optional ）
Audio & Video media stream port
Protocol Type
UDP/TCP
TCP/UDP
TCP/UDP
50000-50499
5060-5061
1719-1720
12
To Next Page
Loading...
