5
• Connect the power adapter head into an electrical socket and then
connect the other end of the power adapter into the charging port on
the base station
• Connect the supplied Ethernet cable between the LAN port on the base
station and the LAN port in your Vodacom router. The Ethernet cable
should be connected to one of the available LAN ports on the router
labelled LAN1, LAN2, LAN3 and LAN4
Powering the base station
6732V-FTTH Set-up guide refresh V3.indd 5 2018/06/28 11:12 AM
To Next Page
Loading...
