9
1 Press and hold the Wi-Fi button at the front of the base station.
2 Press the OK button on the handset to enter into the main menu.
3 Select Settings, then Registration and then Register Handset.
4 Press the Up or Down key to highlight the desired base station and then press the OK soft key.
5 Press the OK key when the LCD screen displays the RFPI code of the base station.
6 Enter the PIN. The default pin is 0000 (four zeros).
7 Press the Done Key.
8 The handset will play the warning tone and prompts “Handset Subscribed”, which indicates the
handset is registered successfully.
Additional handset registration only
6732V-FTTH Set-up guide refresh V3.indd 9 2018/06/28 11:12 AM
To Next Page
Loading...
