EasyManuals Logo

Yealink W60B Introduction

Yealink W60B
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
1. QUICK DETAILS
Default PIN = 0000
Register a handset to a base: On the phone: [ok] (menu)
> Settings > Registration > Register Handset > Select
Base > Phone will begin searching > Press and hold
Wireless button on Base Station > Conrm registration
on Phone
Power Cycling: It takes about 30 seconds for a base
unit to come online and register, as indicated in the three
lights, which sequentially lock after ashing. [Power] >
[Network] > [Phone Service]
Handsets are quickly synchronized with the base station
and should automatically connect once the base station
is online.
Immediately after making changes to Call Features which
impact the Customer Admin Portal, the phone may need
to Synchronize with the Switch, and may be unable to
make/receive calls momentarily (seconds).
“Incoming Lines”: Settings can be set to “ignore” calls,
resulting in Cannot Receive Calls. This is device-specic
and does not show up on the portal or other phones.
Caller Blacklist: This is a telephony setting specic to
the Yealink handset. It acts as a Base station-specic
“Selective Call Rejection,” which prevents calls from
completing to the Yealink Handsets. However, calls will
still complete to other devices (mobile, Polycom and/or
desktop).
Intercom automatically interfaces handsets that
are registered to the base unit. Intercom will oer
the intercom as a call to be answered, unless Auto-
answer intercom is enabled from system settings.
TABLE OF CONTENTS
1. Quick Details
2. What’s Included
3. First time setup
4. Menus
5. Additional Phones (W60B)
6. Phone Menu

Other manuals for Yealink W60B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W60B and is the answer not in the manual?

Yealink W60B Specifications

General IconGeneral
Dimensions130mm x 100mm x 25.1mm
Operating Temperature0°C to +40°C
DECT StandardsCAT-iq 2.0
Number of HandsetsUp to 8
Internal CallsYes
External CallsYes
Call HoldYes
Call TransferYes
3-way ConferenceYes
Call WaitingYes
MuteYes
RedialYes
DECT Radio CoverageUp to 50m indoors, 300m outdoors
PoEIEEE 802.3af Class 1
ConfigurationBrowser/phone/auto-provision
Wall MountableYes
Wireless TechnologyDECT
Channels120
Concurrent CallsUp to 8 concurrent calls
Audio CodecsG.722, G.711, G.729, G.726, iLBC, Opus
SecurityTLS, SRTP, HTTPS, 802.1X
Operating Humidity10 ~ 95%
Handset Registration8 handsets
Frequency Bands1880-1900 MHz
Operating RangeUp to 50m indoors, 300m outdoors
Humidity10-95%
ComplianceCE, FCC, RCM
Network ProtocolsSIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP AccountsUp to 8 SIP accounts
Storage Temperature-30°C to +70°C

Related product manuals