Yealink W60B Introduction

5. ADDITIONAL PHONES
6. TROUBLESHOOTING AND DIAGNOSTICS
Registering a second handset: Verify battery inserted > Menu > Settings > Register Handset > [Select/Replace
Base] > Phone begins searching, press and hold Signal button on Base > This will register the phone.
Minutes after connecting a phone to a base, the handset will oer a rmware update. The rmware update takes
about 30 minutes.
Incoming calls: Each handset can control which handsets receive calls for lines that are assigned to the base
station (e.g. Handset 1 can tell Handset 2 to start or stop receiving calls for a line provisioned to a Base). If all
handsets are set to “ignore” calls, calls will still ring at other devices, for example other phones or mobile devices.
Assigning the same user(number) to
multiple handsets: To assign the same
Outgoing number to multiple handsets, a
user must set the device as a primary device
and increase the number of available lines.
Outgoing calls: In order to allow additional
handsets to dial out, a “line” must be
available for that handset, and each
handset uses a line in the order that the
numbers are listed in Rialto(Broadcloud).
In the following image example, Handset2
would receive line1, Handset 2 would
receive line2, etc.
If the base station is not registered
but powered on, attempting to dial
out will result in an “Unknown Uri
scheme” error.
Searching for Base.
Base is o or out of range. This
message also appears when a
handset is rst powered on.
Phone and Power solid; network
light ashing:
This can occur as a result of
incorrect VLAN conguration, or
if something on the local network
is prohibiting the base from
registering with Broadcloud.

Yealink W60B Specifications

General

Dimensions	130mm x 100mm x 25.1mm
Operating Temperature	0°C to +40°C
DECT Standards	CAT-iq 2.0
Number of Handsets	Up to 8
Internal Calls	Yes
External Calls	Yes
Call Hold	Yes
Call Transfer	Yes
3-way Conference	Yes
Call Waiting	Yes
Mute	Yes
Redial	Yes
DECT Radio Coverage	Up to 50m indoors, 300m outdoors
PoE	IEEE 802.3af Class 1
Configuration	Browser/phone/auto-provision
Wall Mountable	Yes
Wireless Technology	DECT
Channels	120
Concurrent Calls	Up to 8 concurrent calls
Audio Codecs	G.722, G.711, G.729, G.726, iLBC, Opus
Security	TLS, SRTP, HTTPS, 802.1X
Operating Humidity	10 ~ 95%
Handset Registration	8 handsets
Frequency Bands	1880-1900 MHz
Operating Range	Up to 50m indoors, 300m outdoors
Humidity	10-95%
Compliance	CE, FCC, RCM
Network Protocols	SIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP Accounts	Up to 8 SIP accounts
Storage Temperature	-30°C to +70°C