EasyManuals Logo

Yealink W60B Introduction

Yealink W60B
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4. MENUS
h) System Settings
i) Network
(1) Enter Pin
(a) Basic
(i) IP Mode <IPv4>/<IPv6>/<IPv4&IPv6>
(ii) IPv4
1. IP Address type
a. <DHCP>
i. DNS Type
<Automatic>/
<Manual>
b. <Static>
i. IP Address
ii. Subnet Mask
iii. Default Gateway
iv. Primary DNS
v. Secondary DNS
(iii) IPv6
1. IP Address type
a. <DHCP>
i. DNS Type
<Automatic>/<Manual>
b. <Static>
i. IP Address
ii. IP Address Prex
iii. Subnet Mask
iv. Default Gateway
v. Primary DNS
vi. Secondary DNS
(b) VLAN
(i) VLAN DHCP
1. Status <Enabled>/<Disabled>
2. Options (is 123)
(ii) VLAN Parameter
1. <Disabled>/<Enabled> (Is Disabled)
a. Vid [N/A]
b. Priority [N/A]
(c) Handset Reset
(i) Reset to default? <Yes>/<No>
(d) Change Base PIN
(i) Enter current PIN
1. Enter new PIN + Re-enter new PIN
(e) Base Reset
(i) Enter PIN
1. Reset local
2. Reset non-static
3. Reset static
4. Reset user & local
5. Reset to Factory
(f) Base Restart
(i) Enter Pin > [Reboots base]
(g) Autoprovision
(i) Enter PIN
1. Username:
a. (has
MAC
listed)
(h) RPS
(i) Enter PIN
1. Username:
a. (has
MAC
listed)
(i) Eco Mode+ (o by
default)
(i) Enter Pin
1. Requires
reboot:
Reboot
now? <yes/
no>
(j) Eco Mode <on>/<o>
(On by default)
(k) Repeater Mode
<o>/<on> (O by
default)
i) Handset Name
i) Rename: <change name>
j) Upgrade Firmware
i) Press “upgrade” to check for
new rmware
7) History
a) [OK] > Select line
i) To :
ii) Name
iii) Number
iv) Date & Time
v) Duration
b) Options (selects highlighted)
i) Detail
ii) Add To Local
iii) Add To Blacklist
iv) Edit Before Call
v) Delete
vi) Delete All
8) User Mode
a) User Type <Admin>/<var>/<user>
b) Password:
Status > Base > [Please wait…] > IPV4:
[Displays IP Address]

Other manuals for Yealink W60B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W60B and is the answer not in the manual?

Yealink W60B Specifications

General IconGeneral
Dimensions130mm x 100mm x 25.1mm
Operating Temperature0°C to +40°C
DECT StandardsCAT-iq 2.0
Number of HandsetsUp to 8
Internal CallsYes
External CallsYes
Call HoldYes
Call TransferYes
3-way ConferenceYes
Call WaitingYes
MuteYes
RedialYes
DECT Radio CoverageUp to 50m indoors, 300m outdoors
PoEIEEE 802.3af Class 1
ConfigurationBrowser/phone/auto-provision
Wall MountableYes
Wireless TechnologyDECT
Channels120
Concurrent CallsUp to 8 concurrent calls
Audio CodecsG.722, G.711, G.729, G.726, iLBC, Opus
SecurityTLS, SRTP, HTTPS, 802.1X
Operating Humidity10 ~ 95%
Handset Registration8 handsets
Frequency Bands1880-1900 MHz
Operating RangeUp to 50m indoors, 300m outdoors
Humidity10-95%
ComplianceCE, FCC, RCM
Network ProtocolsSIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP AccountsUp to 8 SIP accounts
Storage Temperature-30°C to +70°C

Related product manuals