Yealink W80DM - Pairing and Connecting the Bluetooth-Enabled Mobile Phone; Enabling the Phone Audio; Enabling the Phone Media

| Connecting a Mobile Phonevia Bluetooth | 78
3. Confirm the action.
Pairing and Connecting the Bluetooth-enabled Mobile Phone
The phone cannot scan the Bluetooth devices, so you have to pair and connect the phone from your
Bluetooth-enabled mobile phone.
Before you begin
Make sure you have activated the Bluetooth mode and made the phone discoverable.
Procedure
1. Scan and pair the phone from the Bluetooth-enable mobile phone (the default device name of your
phone is "Yealink-CP930W"/"").
2. Select OK when the phone prompts the connection passkey.
Related tasks
Activating the Bluetooth Mode
Making the Phone Discoverable
Enabling the Phone Audio
When you enable the phone audio, the phone can act as a speaker and microphone for your connected
mobile phone.
The call is made through your mobile phone, but the audio is present on the phone and the call is also
controlled by the phone.
Procedure
1.
Select > Paired Bluetooth Device or go to Menu > Settings > Basic Settings > Bluetooth >
Paired Bluetooth Device.
2. Select Options > Detail > Channel Control.
3. Select Enabled from the Phone Audio field.
4. Confirm the action.
Enabling the Phone Media
You can enable the media audio feature to use the phone as a Bluetooth speaker for your mobile phone/PC
to play music.
Procedure
1.
Select > Paired Bluetooth Device or go to Menu > Settings > Basic Settings > Bluetooth >
Paired Bluetooth Device.
2. Select Options > Detail > Channel Control.
3. Select Enabled from the Media Audio field.