TA1600/2400/3200 User Manual
12/87
Figure 3-1 TA1600/2400/3200 Voice Menu
Tips:
1. Press “9” to listen to the prompt again.
2. Press “*” to return to the last menu.
Call Hold
An active call can be held by pressing "flash" key on the analog phone. Press the key
again to resume the call.
If there is no "flash" key on the phone, you can use "hook flash" (quickly toggle on-off
hook) to hold a call. The call may be disconnected by chance if using "hook flash".
Call Waiting
If the call waiting is activated for the FXS port, the FXS user who is in a call can hear a
call waiting tone "beep" when there is a new incoming call. The user can press "hook
To Next Page
Loading...
Need help?
General
