Yeastar Technology TA1600 - Page 17

TA1600/2400/3200 User Manual
17/87
Table 4-1 Description of FXS Port General Settings
Items
Description
General
Caller ID Name
A character-based name for this user. For
example, Bob Jones.
Caller ID Number
The Caller ID string used when this user calls
another user.
VoIP Serer
Template
VoIP Server
Choose a VoIP server, where the account will be
registered.
User Name
User name provided by VoIP server.
Authentication
Name
Authentication name provided by VoIP server.
Password
Authentication password provided by VoIP
server.
From User
Provided by VoIP server. Keep this field blank if
not needed.
Route
Settings
Dial Pattern
Template
The account will be allowed to make outbound
calls according to the selected template.
DID Number
Defines the expected DID number if this trunk
passes DID on incoming calls. Leave this field
blank to match calls with any or no DID info.
Hotline
Enable Hotline
Select whether to use Hotline or not. Hotline is
disabled by default. If this feature is enabled, the
system will dial out the hotline number
automatically after off-hook.
Hotline Number
Set the number to dial out automatically after
off-hook.
Delay Dial
Define how long to make Hotline take effect after
you pick up the phone.
Flash
Send Hook Flash
Event
If the option “Send Hook Flash Event” is set to
“Yes”, when pressing the flash key on the analog
phone during an active call. TA will send a SIP
DTMF flash event to the VoIP server. It can be