TA1600/2400/3200 User Manual
33/87
Note: It’s recommended that you configure the QoS in your router or switch instead of
TA FXS Gateway side.
4) Response Code
You can change the response code on TA FXS Gateway to the one you want before
sending it to the VoIP server. It helps the VoIP server understands better the exact call
status, like busy, no response and others.
Figure 5-7 Response Code
Note: We don’t’ recommend configuring this if you are not familiar with the code of call
status from the VoIP server.
5) T.38
Settings on this page is for the purpose of improving receiving and sending T.38 FAX.
Figure 5-8 T.38 Settings
To Next Page
Loading...
Need help?
General
