TA1600/2400/3200 User Manual
39/87
General
Table 6-2 Description of General Feature Code
Dial the feature code and the FXS port number when
making calls between the analog phones connected to
multiple ports of the TA FXS Gateway without the use of
a VoIP server.
The prefix number for applying a speed dialing. The
prefix should be added ahead of the speed dial number.
Users may transfer an incoming call by dialing *3 on
their phone.
Users may blind transfer an incoming call by dialing*03
on their phone.
Direct IP calling allows two parties, that is, a FXS Port
with an analog phone and another VoIP Device, to talk
to each other in an ad hoc fashion without a SIP proxy.
The default "Direct IP Calling" feature code is *96. For
detailed instruction, please refer to Basic Operation.
Users can check the analog phone's number by simply
dialing the "Check Number" feature code on the phone.
The default "Check Number" feature code is *97.
Users may enter the voice prompt menu by pressing ***
on their phone.
Voice Menu
Password
Settings
The password of voice menu is required before entering
the advanced settings. The default password is 123456.
To Next Page
Loading...
