Yeastar Technology TA1600 User Manual

TA1600/2400/3200 User Manual
49/87
Table 8-2 Description of RADIUS Settings
Items
Description
Enable RADIUS
Enable RADIUS on TA FXS Gateway.
Primary Server IP
Set IP address of the primary server.
Primary Server
Port
Default is 1813. Specifies the port to be used for the primary
RADIUS account.
Primary Server Key
Specifies the key to be used to authenticate the RADIUS
connection to the Primary server. The key is set according to
the RADIUS server.
Secondary Server
IP
Set IP address of the primary server. The second sever will be
activated the primary one becomes unusable.
Secondary Server
Port
Default is 1813. Specifies the port to be used for the second
RADIUS account.
Secondary Server
Key
Specifies the key to be used to authenticate the RADIUS
connection to the second server. The key is set according to
the RADIUS server.
RADIUS Timeout
Specifies the number of seconds to wait for a response after
the RADIUS message is sent to the server. Default: 10
seconds.
The retransmission will be performed if there is no response
after the timeout.
RADIUS Retry
Times
Specifies the number of times the RADIUS messages will
send to the RADIUS server before giving up. Default: 3.
Call Out CDR
Whether to send "Call Out CDR" to RADIUS server or not.
Call In CDR
Whether to send "Call In CDR" to RADIUS server or not.
No Answer CDR
Whether to send "Call Out CDR" to RADIUS server or not.

Yeastar Technology TA1600 Specifications

General

Brand	Yeastar Technology
Model	TA1600
Category	Gateway
Language	English