TA1600/2400/3200 User Manual
62/87
Connect to Remote Management by Yeastar ID
If you can access the TA gateway, you can enter your Yeastar ID in the TA
gateway, the device will be added to Yeastar Remote Management.
1. Log in the web interface of TA gateway, and go to System>Network
Preferences> Remote Management.
2. Select “By Yeastar ID” from the drop-down menu of Activation Method,
enter your Yeastar ID and password.
3. Click “Save”, the TA gateway will be added to Remote Management.
“Connected” displays if the device is added successfully.
Connect to Remote Management by Authentication Code
If you cannot access the TA gateway, you can add the TA gateway to Yeastar
Remote Management by authentication code.
1. Log in the web interface of Yeastar Remote Management, go to Device> My
device. Click “Add”, enter a device name to help you identify the device, and
click “Add” to add the device.
2. Optional. Verify serial number and MAC address.
Select this option: You need to fill in the serial number and MAC address
of the device. The generated authentication code can be applied to the
device only.
Unselect this option: Any S-Series PBX can access to Remote
Management by the generated authentication code. If the device is
added to Remote Management successfully, the related serial number
and MAC address will be added to device information automatically.
3. Click “Add”, the system will generate an unique authentication code.
4. Log in the web interface of TA gateway, go to System>Network
Preferences>Remote Management.
5. Select “By Authentication Code” from the drop-down menu of Activation
Method, and enter the authentication code.
To Next Page
Loading...
Need help?
General
