YOKOGAWA AXF series - Combination Remote Converters

IM 01E20D01-01E
1-4
1. INTRODUCTION
1.3 Combination Remote
Converters
IMPORTANT
• The AXF remote flowtube should be used in
combination with one of the following convert-
ers:
- AXFA11 remote converter
- AXFA14 remote converter
Contact Yokogawa before using it in combina-
tion with converters other than those listed
above.
• In case of TIIS Flameproof type, a remote
flowtube is available for combined use with the
AXFA14 remote converter only.
• If the converter combined with the AXF mag-
netic flowmeter’s remote flowtube is changed
from the AXFA11 to AXFA14 or vice versa, the
meter factor of the remote flowtube must be
readjusted according to its flow calibration.