YOKOGAWA DL350 - Page 125

4-98
IM DL350-17EN
:CURSor:XY:VERTical:X<x>?
Function Queries all X-axis-value settings for a vertical
cursor on the X-Y waveform.
Syntax
:CURSor:XY:VERTical:X<x>?
:CURSor:XY:VERTical:X<x>:STATe
Function Sets or queries whether the X-axis value for a
vertical cursor on the X-Y waveform is displayed.
Syntax
:CURSor:XY:VERTical:X<x>:
STATe {<Boolean>}
:CURSor:XY:VERTical:X<x>:STATe?
<x> = 1, 2
Example
:CURSOR:XY:VERTICAL:X1:STATE ON
:CURSOR:XY:VERTICAL:X1:STATE?
-> :CURSOR:XY:VERTICAL:X1:STATE 1
:CURSor:XY:VERTical:X<x>:VALue?
Function Queries the X-axis value between the vertical
cursors on the X-Y waveform.
Syntax
:CURSor:XY:VERTical:X<x>:VALue?
<x> = 1, 2
Example
:CURSOR:XY:VERTICAL:X1:VALUE?
-> :CURSOR:XY:VERTICAL:X1:
VALUE−150.00000E+00
4.9 CURSor Group