EasyManua.ls Logo

YOKOGAWA DL350 - Connecting to the USB Interface

YOKOGAWA DL350
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-4
IM DL350-17EN
2.3 Connecting to the USB Interface
Precautions to Be Taken When Connecting Probes
Be sure to insert the USB cable connector firmly into the USB port.
If you are connecting multiple devices by using a USB hub, connect the instrument to the USB
hub port that is closest to the port that the controller is connected to.
Do not connect or remove USB cables from the time when the instrument is turned on until
operation becomes available (approximately 20 to 30 seconds). Doing so may damage the
instrument.

Table of Contents

Other manuals for YOKOGAWA DL350

Related product manuals