YOKOGAWA DL350 User Manual

4-121
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
4.19 INITialize Group
The commands in this group deal with initializing the settings. You can perform the same operations that you can by
using Preparation > Initialize in the top menu.
:INITialize:EXECute
Function Initializes the settings.
Syntax
:INITialize:EXECute
Description • The following settings cannot be reset.
- Date and time settings
- Communication settings
- Language setting (English or Japanese)
- Environment settings
• This command is not accepted while measuring
in recorder mode (error 653). Stop measuring
before using this command.
• This command is not accepted during SD
recording (error 814). Stop SD recording before
using this command.
• History data will be cleared.
• Measurement will not start after initialization.

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English