YOKOGAWA DL350 User Manual

4-100
IM DL350-17EN
:DISPlay:FORMat
Function Sets or queries the display format (the number of
divisions in the vertical direction).
Syntax
:DISPlay:FORMat {<NRf>}
:DISPlay:FORMat?
<NRf> = 1, 2, 3, 4, 5, 6, 8, 12, 16
Example
:DISPLAY:FORMAT 4
:DISPLAY:FORMAT?
-> :DISPLAY:FORMAT 4
:DISPlay:GRATicule
Function Sets or queries the grid type.
Syntax
:DISPlay:GRATicule {CROSshair|FRAMe|
GRID}
:DISPlay:GRATicule?
Example
DISPLAY:GRATICULE GRID
DISPLAY:GRATICULE?
-> :DISPLAY:GRATICULE GRID
:DISPlay:GROup<x1>?
Function Queries all display group settings.
Syntax
:DISPlay:GROup<x1>?
:DISPlay:GROup<x1>:ACLear (All
Clear)
Function Clears all the trace assignments of the specified
display group.
Syntax
:DISPlay:GROup<x1>:ACLear
<x1> = 1 to 4
Example
:DISPLAY:GROUP1:ACLEAR
:DISPlay:GROUp<x1>:FORMat
Function Sets or queries the display format (the number of
divisions in the vertical direction) of the specified
display group.
Syntax
:DISPlay:GROUp<x1>:FORMat {G1|<NRf>}
:DISPlay:GROUp<x1>:FORMat?
<x1> = 1 to 4
<NRf> = 1, 2, 3, 4, 5, 6, 8, 12, 16
Example
:DISPLAY:GROUP1:FORMAT 4
:DISPLAY:GROUP1:FORMAT?
-> :DISPLAY:GROUP1:FORMAT 4
Description If G1 is specified, <x1> cannot be set to 1.
:DISPlay:GROup<x1>:TRACe<x2>?
Function Queries all source waveform settings for a display
group.
Syntax
:DISPlay:GROup<x1>:TRACe<x2>?
:DISPlay:GROup<x1>:TRACe<x2>:SOURce
Function Sets or queries the source that is assigned to
the specified source waveform of the specified
display group.
Syntax
:DISPlay:GROup<x1>:TRACe<x2>:
SOURce {OFF|MATH<x3>|<NRf>[,<NRf>]}
:DISPlay:GROup<x1>:TRACe<x2>:SOURce?
<x1> = 1 to 4
<x2> = 1 to 32
<x3> = 1, 2
First <NRf> = 1 to 5
Second <NRf> = 1 to 60 (only when it is
necessary to specify the sub channel)
Example
:DISPLAY:GROUP1:TRACE1:SOURCE 1
:DISPLAY:GROUP1:TRACE1:SOURCE?
-> :DISPLAY:GROUP1:TRACE1:SOURCE 1
:DISPlay:GROup<x1>:TRACe<x2>:ZNUMber
(Zone Number)
Function Sets or queries the zone number that displays
the specified source waveform of the specified
display group.
Syntax
:DISPlay:GROup<x1>:TRACe<x2>:
ZNUMber {<NRf>}
:DISPlay:GROup<x1>:TRACe<x2>:
ZNUMber?
<x1> = 1 to 4
<x2> = 1 to 32
<NRf> = 1 to 16
Example
:DISPLAY:GROUP1:TRACE1:ZNUMBER 1
:DISPLAY:GROUP1:TRACE1:ZNUMBER?
-> :DISPLAY:GROUP1:TRACE1:ZNUMBER 1
Description Regardless of the number of zones that have
been set, you can always specify a number from
1 to 16 with this command.
:DISPlay:INTENsity:{CURSor|GRID|MARK
er}
Function Sets or queries the intensity of a display item.
Syntax
:DISPlay:INTENsity:{CURSor|GRID|
MARKer} {<NRf>}
:DISPlay:INTENsity:{CURSor|GRID|
MARKer}?
<NRf> = 1 to 8
Example
:DISPLAY:INTENSITY:CURSOR 8
:DISPLAY:INTENSITY:CURSOR?
-> :DISPLAY:INTENSITY:CURSOR 8
:DISPlay:INTerpolate
Function Sets or queries the waveform interpolation
method.
Syntax
:DISPlay:INTerpolate {LINE|OFF|
PULSe|SINE}
:DISPlay:INTerpolate?
Example
:DISPLAY:INTERPOLATE LINE
:DISPLAY:INTERPOLATE?
-> :DISPLAY:INTERPOLATE LINE
4.10 DISPlay Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English