YOKOGAWA DL350 User Manual

4-107
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:FILE:SAVE:{ASCii|BINary|MATLab}?
Function Queries all the settings related to the saving of a
specific type of file.
Syntax
:FILE:SAVE:{ASCii|BINary|MATLab}?
:FILE:SAVE:{ASCii|BINary|MATLab}:ABO
Rt
Function Aborts the saving of a specific type of file.
Syntax
:FILE:SAVE:{ASCii|BINary|MATLab}:
ABORt
Example
:FILE:SAVE:ASCII:ABORT
:FILE:SAVE:{ASCii|BINary|MATLab}:CRA
Nge<x>
Function Sets or queries the cursor position for when data
is to be saved using a cursor range.
Syntax
:FILE:SAVE:{ASCii|BINary|MATLab}:
CRANge<x> {<NRf>}
:FILE:SAVE:{ASCii|BINary|MATLab}:
CRANge<x>?
<x> = 1, 2
<NRf> = Resolution (depends on the
measurement length)
:FILE:SAVE:{ASCii|FFT}:DPOint
Function Sets or queries the type of decimal point that is
used when saving data in ASCII format.
Syntax
:FILE:SAVE:{ASCii|FFT}:
DPOint {POINt|COMMa}
:FILE:SAVE:{ASCii|FFT}:DPOint?
Example
:FILE:SAVE:ASCII:DPOINT POINT
:FILE:SAVE:ASCII:DPOINT?
-> :FILE:SAVE:ASCII:DPOINT POINT
:FILE:SAVE:{ASCii|BINary|HARMonic|MAT
Lab|MEASure|SETup|SNAP|FFT}[:EXECute]
Function Executes the saving of a specific type of file. This
is an overlap command.
Syntax
:FILE:SAVE:{ASCii|BINary|HARMonic|
MATLab|MEASure|SETup|SNAP|FFT}[:
EXECute]
Example
:FILE:SAVE:SETUP:EXECUTE
:FILE:SAVE:{ASCii|BINary}:HISTory
Function Sets or queries type of data for which history
waveforms will be saved.
Syntax
:FILE:SAVE:{ASCii|BINary}:
HISTORY {ONE|ALL}
:FILE:SAVE:{ASCii|BINary}:HISTORY?
Example
:FILE:SAVE:BINARY:HISTORY ALL
:FILE:SAVE:BINARY:HISTORY?
-> :FILE:SAVE:BINARY:HISTORY ALL
:FILE:SAVE:{ASCii|BINary|MATLab}:RAN
Ge
Function Sets or queries the save range for a specific type
of data.
Syntax
:FILE:SAVE:{ASCii|BINary|MATLab}:
RANGe {MAIN|Z1|Z2|CURSor}
:FILE:SAVE:{ASCii|BINary|MATLab}:
RANGe?
Example
:FILE:SAVE:BINARY:RANGE CURSOR
:FILE:SAVE:BINARY:RANGE?
-> :FILE:SAVE:BINARY:RANGE CURSOR
:FILE:SAVE:{ASCii|BINary|MATLab}:STR
ace:{CHANnel<x1>[:SCHannel<x2>]|MATH
<x3>}
Function Sets or queries the waveform that will be saved
for a specific type of data.
Syntax
:FILE:SAVE:{ASCii|BINary|MATLab}:
STRace:{CHANnel<x1>[:SCHannel<x2>]|
MATH<x3>} {<Boolean>}
:FILE:SAVE:{ASCii|BINary|MATLab}:
STRace:{CHANnel<x1>[:SCHannel<x2>]|
MATH<x3>}?
<x1> = 1 to 7
<x2> = 1, 2 (only on a 4-CH module (720254))
<x3> = 1, 2
Example
:FILE:SAVE:BINARY:STRACE:CHANNEL1 ON
:FILE:SAVE:BINARY:STRACE:CHANNEL1?
-> :FILE:SAVE:BINARY:STRACE:
CHANNEL1 1
Description When the Trace All setting is set to OFF, the
source waveforms of waveforms that are
displayed and that have this setting set to ON will
be saved.
:FILE:SAVE:{ASCii|BINary|MATLab}:TA
LL (Trace All)
Function Sets or queries the selection method for the
waveforms that will be saved for a specific type of
data.
Syntax
:FILE:SAVE:{ASCii|BINary|MATLab}:
TALL {<Boolean>}
:FILE:SAVE:{ASCii|BINary|MATLab}:
TALL?
ON: All channels whose waveforms are
displayed will be saved.
OFF: The channels whose waveforms are
displayed and whose waveforms are set to
be saved will be saved.
Example
:FILE:SAVE:BINARY:TALL ON
:FILE:SAVE:BINARY:TALL?
-> :FILE:SAVE:BINARY:TALL 1
4.13 FILE Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English