YOKOGAWA DL350 User Manual

4-31
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:ACQuire:RECorder:NUMeric?
Function Queries all SD numeric recording settings for
recorder mode.
Syntax
:ACQUire:RECorder:NUMeric?
:ACQuire:RECorder:NUMeric:INTerval
Function Sets or queries the recording interval of SD
numeric recording for recorder mode.
Syntax
:ACQUire:RECorder:NUMeric:
INTerval {<Time>}
:ACQUire:RECorder:NUMeric:INTerval?
<Time> = 1s, 2s, 5s, 10s, 15s, 20s, 30s, 60s,
120s, 300s, 600s, 900s, 1200s, 1800s, 3600s
Example
:ACQUIRE:RECORDER:NUMERIC:
INTERVAL 1s
:ACQUIRE:RECORDER:NUMERIC:INTERVAL?
-> ACQUIRE:RECORDER:NUMERIC:
INTERVAL 1
:ACQuire:RECorder:NUMeric:MODE
Function Sets or queries the ON/OFF state of SD numeric
recording for recorder mode.
Syntax
:ACQUire:RECorder:NUMeric:
MODE {<Boolean>}
:ACQUire:RECorder:NUMeric:MODE?
Example
:ACQUIRE:RECORDER:NUMERIC:MODE ON
:ACQUIRE:RECORDER:NUMERIC:MODE?
-> ACQUIRE:RECORDER:NUMERIC:MODE 1
:ACQuire:RECorder:RLENgth
Function Sets or queries the external sampling recording
length for recorder mode.
Syntax
:ACQUire:RECorder:RLENgth {<NRf>}
:ACQUire:RECorder:RLENgth?
Memory recording
• When a 4CH module is installed
<NRf> = 10000 to 10000000
• When a 4CH module is not installed
<NRf> = 10000 to 25000000
SD recording
• When a 4CH module is installed
<NRf> = 10000 to 500000000
• When a 4CH module is not installed
<NRf> = 10000 to 1000000000
Step = 10000, 25000, 50000, 100000, 250000,
500000, 1000000, 2500000, 5000000,
10000000, 25000000, 50000000, 100000000,
250000000, 500000000, 1000000000
Example
:ACQUIRE:RECORDER:RLENGTH 1000000
:ACQUIRE:RECORDER:RLENGTH?
-> :ACQUIRE:RECORDER:RLENGTH 1000000
:ACQuire:RECorder:SINTerval (Sampling
Interval)
Function Sets or queries the sampling interval for recorder
mode.
Syntax
:ACQuire:RECorder:SINTerval {<Time>}
:ACQuire:RECorder:SINTerval?
<Time> = 10 ns to 200 ms
Example
:ACQUIRE:RECORDER:SINTERVAL 1us
:ACQUIRE:RECORDER:SINTERVAL?
-> :ACQUIRE:RECORDER:SINTERVAL 1us
:ACQuire:RECorder:TIME
Function Sets or queries the record time for recorder
mode.
Syntax
:ACQuire:RECorder:TIME {<NRf>,<NRf>,
<NRf>,<NRf>}
:ACQuire:RECorder:TIME?
First <NRf> = Days (0 to 20)
Second <NRf> = Hours (0 to 23)
Third <NRf> = Minutes (0 to 59)
Fourth <NRf> = Seconds (0 to 59)
Example
:ACQUIRE:RECORDER:TIME 0,0,1,30
:ACQUIRE:RECORDER:TIME?
-> ACQUIRE:RECORDER:TIME 0,0,1,30
Description Selectable range:
Memory recording 10 s to 20 days
SD recording 10 s to 50 days
:ACQuire:RLENgth
Function Sets or queries the record length for scope mode.
Syntax
:ACQuire:RLENgth {<NRf>}
:ACQuire:RLENgth?
<NRf> = 10000 to 100000000
Step = 10000, 25000, 50000, 100000, 250000,
500000, 1000000, 2500000, 5000000,
10000000, 25000000, 50000000, 100000000
Example
:ACQUIRE:RLENGTH 100000
:ACQUIRE:RLENGTH?
-> :ACQUIRE:RLENGTH 100000
Description An error will occur if you use this command in
recorder mode.
4.2 ACQuire Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English