YOKOGAWA DL350 User Manual

4-55
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:CHANnel<x>:FREQ:VDIV
Function Sets or queries the Value/Div setting of a
frequency module.
Syntax
:CHANnel<x>:FREQ:VDIV {<NRf>|
<Frequency>|<Time>}
:CHANnel<x>:FREQ:VDIV?
<x> = 1 to 4
{<NRf>|<Frequency>|<Time>} = See the DL350
Features Guide for this information.
Example
:CHANNEL1:FREQ:VDIV 20
:CHANNEL1:FREQ:VDIV?
-> :CHANNEL1:FREQ:VDIV 20
:CHANnel<x>:FREQ:ZOOM
Function Sets or queries the vertical zoom factor of a
frequency module.
Syntax
:CHANnel<x>:FREQ:ZOOM {<NRf>}
:CHANnel<x>:FREQ:ZOOM?
<x> = 1 to 4
<NRf> = 0.33, 0.4, 0.5, 0.556, 0.625, 0.667, 0.714,
0.8, 0.833, 1, 1.11, 1.25, 1.33, 1.43, 1.67,
2, 2.22, 2.5, 3.33, 4, 5, 6.67, 8, 10, 12.5,
16.7, 20, 25, 40, 50, 100
Example
:CHANNEL1:FREQ:ZOOM 1
:CHANNEL1:FREQ:ZOOM?
-> :CHANNEL1:FREQ:ZOOM 1
:CHANnel<x>:LABel
Function Sets or queries the waveform label of a channel.
Syntax
:CHANnel<x>:LABel {<String>}
:CHANnel<x>:LABel?
<x> = 1 to 4
<String> = Up to 16 characters
Example
:CHANNEL1:LABEL “ABC”
:CHANNEL1:LABEL?
-> :CHANNEL1:LABEL “ABC”
Description This setting is invalid for a module that has sub
channels, but it is valid for logic modules.
:CHANnel<x>:LIN?
Function Queries all settings of a module that can monitor
LIN bus signals.
Syntax
:CHANnel<x>:LIN?
<x> = 2, 4
:CHANnel<x1>:LIN:FRAMe<x2>?
Function Queries all LIN bus signal frame settings.
Syntax
:CHANnel<x1>:LIN:FRAMe<x2>?
<x1> = 2, 4
<x2> = 1 to 64
:CHANnel<x1>:LIN:FRAMe<x2>:CHECksum
Function Sets or queries the checksum mode of LIN bus
signal frames.
Syntax
:CHANnel<x1>:LIN:FRAMe<x2>:
CHECksum {CLASsic|ENHanced}
:CHANnel<x1>:LIN:FRAMe<x2>:CHECksum?
<x1> = 2, 4
<x2> = 1 to 64
Example
:CHANNEL4:LIN:FRAME1:
CHECKSUM CLASSIC
:CHANNEL4:LIN:FRAME1:CHECKSUM?
-> :CHANNEL4: LIN:FRAME1:
CHECKSUM CLASSIC
Description When FRAMe<x2> = 1, frame ID = 0.
When <x2> = 64, frame ID = 63.
:CHANnel<x1>:LIN:FRAMe<x2>:DLENgth
Function Sets or queries the data length of LIN bus signal
frames.
Syntax
:CHANnel<x1>:LIN:FRAMe<x2>:
DLENgth {<NRf>}
<x1> = 2, 4
<x2> = 1 to 64
<NRf> = 1 to 8
Example
:CHANNEL4:LIN:FRAME1:DLENGTH 8
:CHANNEL4:LIN:FRAME1:DLENGTH?
-> :CHANNEL4:LIN:FRAME1:DLENGTH 8
Description When FRAMe<x2> = 1, frame ID = 0. When <x2>
= 64, frame ID = 63.
:CHANnel<x>:LIN:PORT?
Function Queries all settings of the specified port of a
module that can monitor LIN bus signals.
Syntax
:CHANnel<x>:LIN:PORT?
<x> = 2, 4
4.6 CHANnel Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English