EasyManua.ls Logo

YOKOGAWA DLM4038 - Synchronization with the Controller

YOKOGAWA DLM4038
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.1 Handling Precautions
2-2
IM DLM4038-03EN
When Carrying the Instrument
Remove the power cord and connecting cables. When carrying the instrument, either hold the handle
or hold the instrument with both hands as shown in the figure below.
WARNING
When you hold or put away the handle, be careful not to get your hand caught between the
handle and the case.
When you carry the instrument, be careful not to get your hand caught between the wall,
installation surface, or other objects and the instrument.
French
AVERTISSEMENT
Lorsque vous attrapez ou rabattez la poignée, veillez à ne pas vous coincer la main entre
la poignée et l’instrument.
Lorsque vous déplacez l’instrument, veillez à ne pas vous coincer la main entre l’instrument
et le mur, la surface d’installation ou tout autre objet.
When Cleaning the Instrument
When cleaning the case or the operation panel, first remove the power cord from the outlet, and then
wipe with a dry, soft, clean cloth. Do not use chemicals such as benzene or thinner. Doing so may
cause discoloring and deformation.

Table of Contents

Other manuals for YOKOGAWA DLM4038

Related product manuals