Need help?Do you have a question about the YOKOGAWA DLM4038 and is the answer not in the manual?
General| Number of Channels | 4 |
|---|---|
| Bandwidth | 350 MHz |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 1 mV/div to 10 V/div |
| Time Base Range | 1 ns/div to 100 s/div |
| Input Impedance | 1 MΩ ± 1% |
| Trigger Types | Edge, Pulse, Window, Video |
| Interface | USB, LAN, GPIB |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
| Dimensions | 320 mm |
| Weight | Approx. |
| Maximum Sampling Rate | 2.5 GS/s (Interleave: 12.5 GS/s) |
| Memory Depth | 125 Mpoints |
Describes the front and rear panel components related to the USB interface.
Details the reception and transmission features, specifications, and PC system requirements.
Provides notes and procedures for connecting the DLM4000 via USB.
Explains how to configure communication interface and remote control settings for USB.
Describes the front and rear panel components related to the Ethernet interface.
Details interface features, specifications, and PC system requirements for Ethernet.
Provides connection procedures and notes for using the Ethernet interface.
Explains how to configure communication interface, network mode, and timeout settings.
Describes the front and left side components related to the GP-IB interface.
Details GP-IB cable specifications, connection procedures, and notes.
Explains listener and talker capabilities and switching between remote and local modes.
Details electrical, functional specifications, protocol, and data transfer rates.
Explains how to configure the communication interface and GP-IB address.
Describes responses to Uni-line and Multi-line messages and what interface messages are.
Explains program and response messages, their syntax, and terminators.
Describes common, compound, and simple command headers and concatenation rules.
Explains response forms, returning responses without headers, and abbreviated forms.
Details data formats, multipliers, units, and data types used in commands and responses.
Explains overlap commands, sequential commands, and synchronization methods.
Provides a comprehensive list of all commands, their functions, and corresponding pages.
Details commands related to waveform acquisition settings.
Details commands for power supply analysis and waveform histogram features.
To Next Page
