App-6
IM DLM4038-17EN
(19) The change in the status due to *RST, *LRN?,
*RCL, and *SAV
*RST
See section 5.39, “Common Command Group.”
*LRN?, *RCL and *SAV
These common commands are not supported.
(20) The extent of the self-test using the *TST?
command
Performs the same internal memory test that is
executed when the user presses UTILITY and then
the Self Test soft key, and executes the MEMORY
test.
(21) The structure of the extended return status
See chapter 6.
(22) Whether each command is processed in an
overlapped manner or sequentially
See section 4.5, “Synchronization with the
Controller” and chapter 5.
(23) The description of the execution of each
command
See the explanations of each command’s function in
chapter 5; the features guide, IM DLM4038-01EN;
and the user’s manual, IM DLM4038-02EN.
Appendix 3 About the IEEE 488.2-1992 Standard
To Next Page
Loading...
Need help?
General
