YOKOGAWA DLM4038 User Manual

5-88
IM DLM4038-17EN
5.10 CURSor Group
:CURSor?
Function Queries all cursor measurement settings.
Syntax
:CURSor?
:CURSor[:TY]?
Function Queries all cursor settings.
Syntax
:CURSor[:TY]?
:CURSor[:TY]:DEGRee?
Function Queries all angle cursor settings.
Syntax
:CURSor[:TY]:DEGRee?
:CURSor[:TY]:DEGRee:ALL
Function Collectively turns on or off the measured values
of the angle cursor on the T-Y display.
Syntax
:CURSor:TY:DEGRee:ALL {<Boolean>}
Example
:CURSOR:TY:DEGREE:ALL ON
:CURSor[:TY]:DEGRee:D<x>?
Function Queries all angle cursor angle settings.
Syntax
:CURSor[:TY]:DEGRee:D<x>?
<x> = 1 to 2
:CURSor[:TY]:DEGRee:D<x>:STATe
Function Sets or queries the on/off status of an angle
cursor angle.
Syntax
:CURSor[:TY]:DEGRee:D<x>:STATe {<Boo
lean>}
:CURSor[:TY]:DEGRee:D<x>:STATe?
<x> = 1 to 2
Example
:CURSOR:TY:DEGREE:D1:STATE ON
:CURSOR:TY:DEGREE:D1:STATE?
-> :CURSOR:TY:DEGREE:D1:STATE 1
:CURSor[:TY]:DEGRee:D<x>:VALue?
Function Queries an angle cursor angle.
Syntax
:CURSor[:TY]:DEGRee:D<x>:VALue?
<x> = 1 to 2
Example
:CURSOR:TY:DEGREE:D1:VALUE?
-> :CURSOR:TY:DEGREE:D1:
VALUE−120.00000E+00
:CURSor[:TY]:DEGRee:DD?
Function Queries all of the settings for the angle difference
between the angle cursors.
Syntax
:CURSor[:TY]:DEGRee:DD?
:CURSor[:TY]:DEGRee:DD:STATe
Function Sets or queries the on/off status of the angle
difference value D, which is measured between
the angle cursors.
Syntax
:CURSor[:TY]:DEGRee:DD:STATe {<Boole
an>}
:CURSor[:TY]:DEGRee:DD:STATe?
Example
:CURSOR:TY:DEGREE:DD:STATE ON
:CURSOR:TY:DEGREE:DD:STATE?
-> :CURSOR:TY:DEGREE:DD:STATE 1
:CURSor[:TY]:DEGRee:DD:VALue?
Function Queries the angle difference value D, which is
measured between the angle cursors.
Syntax
:CURSor[:TY]:DEGRee:DD:VALue?
Example
:CURSOR:TY:DEGREE:DD:VALUE?
-> :CURSOR:TY:DEGREE:DD:VALUE 180.00
000E+00
:CURSor[:TY]:DEGRee:DV?
Function Queries all of the settings for the V value, which
is measured between the angle cursors.
Syntax
:CURSor[:TY]:DEGRee:DV?
:CURSor[:TY]:DEGRee:DV:STATe
Function Sets or queries the on/off status of the V value,
which is measured between the angle cursors.
Syntax
:CURSor[:TY]:DEGRee:DV:STATe {<Boole
an>}
:CURSor[:TY]:DEGRee:DV:STATe?
Example
:CURSOR:TY:DEGREE:DV:STATE ON
:CURSOR:TY:DEGREE:DV:STATE?
-> :CURSOR:TY:DEGREE:DV:STATE 1
:CURSor[:TY]:DEGRee:DV:VALue?
Function Queries the V value, which is measured between
the angle cursors.
Syntax
:CURSor[:TY]:DEGRee:DV:VALue?
Example
:CURSOR:TY:DEGREE:DV:VALUE?
-> :CURSOR:TY:DEGREE:DV:VALUE 6.2500
000E−03
:CURSor[:TY]:DEGRee:JUMP
Function Makes an angle cursor in the T-Y display jump to
the specified zoom waveform.
Syntax
:CURSor[:TY]:DEGRee:JUMP {C1_Z1|
C1_Z2|C2_Z1|C2_Z2}
Example
:CURSOR:TY:DEGREE:JUMP C1_Z1
Description Jumps to the center of the zoom waveform. C1
and C2 are used to indicate Cursor1 and Cursor2.

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English