To Next Page

To Previous Page

5-237

IM DLM4038-17EN

Commands

App

Index

5.27 SSTart Group

:SSTart?

Function Sets the trigger mode to SINGLE, and starts

waveform acquisition. Returns zero if data

acquisition is stopped before the specified time

period. Returns 1 if waveform acquisition is not

stopped within the specified time period.

Syntax

:SSTart? {<NRf>}

<NRf> = 1 to 36000 (in 100-ms steps. Start and

wait.)

<NRf> = 0 (start without any waiting)

<NRf> = 36000 to −1 (in 100-ms steps. Wait

without starting.)

Example

:SSTART? 10

-> :SSTART 1

Description • If you specify a positive time value, the

DLM4000 starts waveform acquisition in Single

Trigger mode and waits until the waveform

acquisition is stopped within the specified time

period.

• If you set the time value to zero, the DLM4000

starts waveform acquisition and returns zero

without waiting until the waveform acquisition is

stopped.

• If you specify a negative time value, the

DLM4000 does not start waveform acquisition

and simply waits until the waveform acquisition

in progress is stopped within the specified time

period.

YOKOGAWA DLM4038 User Manual

Other manuals for YOKOGAWA DLM4038