YOKOGAWA DLM4038 User Manual

5-1
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
5.1 List of Commands
Command Function Page
ACQuire Group
:ACQuire?
Queries all waveform acquisition settings. 5-61
:ACQuire:AVERage?
Queries all of the settings related to averaging and the number of waveform
acquisitions.
5-61
:ACQuire:AVERage:COUNt
Sets or queries the attenuation constant for exponential averaging or the
average count for linear averaging for Averaging mode.
5-61
:ACQuire:COUNt
Sets or queries the number of waveform acquisitions in Normal, Envelope,
and Averaging modes.
5-61
:ACQuire:INTerleave
Sets or queries the on/off status of Interleave mode. 5-61
:ACQuire:MODE
Sets or queries the waveform acquisition mode. 5-61
:ACQuire:RESolution
Sets or queries the on/off status of High Resolution mode. 5-61
:ACQuire:RLENgth
Sets or queries the record length. 5-61
:ACQuire:SAMPling
Sets or queries the sampling mode. 5-61
ANALysis Group
:ANALysis?
Queries all of the settings for the analysis feature. 5-62
:ANALysis:AHIStogram<x>?
Queries all of the settings for the waveform histogram feature. 5-62
:ANALysis:AHIStogram<x>:DISPlay
Sets or queries the on/off status of a waveform histogram display. 5-62
:ANALysis:AHIStogram<x>:HORizon
tal
Sets or queries the horizontal range of a waveform histogram. 5-62
:ANALysis:AHIStogram<x>:MEASu
re?
Queries all of the settings for waveform histogram measurement (including
the mode on/off status).
5-62
:ANALysis:AHIStogram<x>:MEASure
:MODE
Sets or queries the measurement mode of a waveform histogram. 5-62
:ANALysis:AHIStogram<x>:MEASure
:PARameter?
Queries all of the measurement settings for a waveform histogram when the
histogram parameter measurement mode is set to Param.
5-62
:ANALysis:AHIStogram<x>:MEASure
:PARameter:ALL
Collectively turns on or off all of the measurement items of a waveform
histogram.
5-62
:ANALysis:AHIStogram<x>:MEASure
:PARameter:<Parameter>?
Queries all of the settings for the specified measurement item of a waveform
histogram.
5-62
:ANALysis:AHIStogram<x>:MEASure
:PARameter:<Parameter>:STATe
Sets or queries the on/off status of the specified measurement item of a
waveform histogram.
5-62
:ANALysis:AHIStogram<x>:MEASure
:PARameter:<Parameter>:VALue?
Queries the automatically measured value for the specified measurement
item of a waveform histogram.
5-63
:ANALysis:AHIStogram<x>:MEASure
:PARameter:HPOSition<y>
Sets or queries the horizontal position of Cursor1 or Cursor 2 for a waveform
histogram.
5-63
:ANALysis:AHIStogram<x>:MEASure
:PARameter:VPOSition<y>
Sets or queries the vertical position of Cursor1 or Cursor 2 for a waveform
histogram.
5-63
:ANALysis:AHIStogram<x>:MODE
Sets or queries the target axis of a waveform histogram. 5-63
:ANALysis:AHIStogram<x>:RANGe
Sets or queries the measurement source window of a waveform histogram. 5-63
:ANALysis:AHIStogram<x>:TRACe
Sets or queries the source waveform of a waveform histogram. 5-63
:ANALysis:AHIStogram<x>:VERTic
al
Sets or queries the vertical range of a waveform histogram. 5-63
:ANALysis:PANalyze<x>?
Queries all power supply analysis settings. 5-63
:ANALysis:PANalyze<x>:HARMoni
cs?
Queries all harmonic analysis settings. 5-64
:ANALysis:PANalyze<x>:HARMonics
:CCLass?
Queries all class C harmonic analysis settings. 5-64
:ANALysis:PANalyze<x>:HARMonics
:CCLass:GETLambda
Queries the current power factor for class C harmonic analysis. 5-64
:ANALysis:PANalyze<x>:HARMonics
:CCLass:LAMBda
Sets or queries the power factor for class C harmonic analysis. 5-64
:ANALysis:PANalyze<x>:HARMonics
:CCLass:MAXCurrent
Sets or queries the fundamental current value for class C harmonic analysis. 5-64
:ANALysis:PANalyze<x>:HARMonics
:CCLass:OPOWer
Sets or queries whether or not the active power for class C harmonic
analysis exceeds 25 W.
5-64
Chapter 5 Commands

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English