EasyManuals Logo

YOKOGAWA DLM4038 Getting Started Guide

YOKOGAWA DLM4038
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Making Preparations for Measurements
2-3
IM DLM4038-03EN
1
2
3
4
5
6
App
Index
2.2 Installing the Instrument
WARNING
Do not install the instrument outdoors or in locations subject to rain or water.
Install the instrument so that you can immediately remove the power cord if an abnormal or
dangerous condition occurs.
CAUTION
If you block the inlet or outlet holes on the DLM4000, the DLM4000 will become hot and may
break down.
French
AVERTISSEMENT
Ne pas installer l’instrument à l’extérieur ou dans des lieux exposés à la pluie ou à l’eau.
Installer l’instrument de manière à pourvoir immédiatement le débrancher du secteur en
cas de fonctionnement anormal ou dangereux.
ATTENTION
Ne pas boucher les orifices d’entrée ou de sortie du DLM4000 pour éviter toute surchauffe et
panne éventuelle.
Installation Conditions
Install the instrument in a place that meets the following conditions.
Flat, Even Surface
Install the instrument with the correct orientation on a stable, horizontal surface (see page 2-5). The
printing quality may be hindered when the instrument is placed in an unstable or inclined place.

Table of Contents

Other manuals for YOKOGAWA DLM4038

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA DLM4038 and is the answer not in the manual?

YOKOGAWA DLM4038 Specifications

General IconGeneral
BrandYOKOGAWA
ModelDLM4038
CategoryTest Equipment
LanguageEnglish

Related product manuals