4-17
IM 01F06A00-01E
4. BASIC OPERATING PROCEDURES
1 Device setup
2 PV [cr]
3 AO1 [cr]
4 Flow Span [cr]
5 Mode
3 Basic setup
3
Fluid [#]
4
Flow span[r&w][u/d]
5 PV Damp[r&w][u/d]
<B15>
Online Menu
to be continued to next page
Liquid:Volume
Gas/Steam:Volume
Liquid:Mass
Gas/Steam:Mass
Gas:STD/Normal
1 Volumetric unit[u/d] <C22>
2 Time unit[u/d] <C40>
3 End
Cum [r&w sel](*2)
k Cum
L
Cuft
m Cuft
k Cuft
gal
k gal
Impgal
k Impgal
bbl
m bbl
k bbl
s [r&w sel](*1)
min
h
d
1 Density unit[u/d] <C25>
2
Process density[r&w][u/d]<C26>
3 Mass unit[u/d] <C27>
4 Time unit[u/d] <C40> (*1)
5 End
kg/Cum [r&w sel](*6)
lb/Cuft
lb/gal
lb/Impgal
Kg [r&w sel](*3)
MetTon
lb
k lb
1 Temp unit[u/d]
2 Process temp[r&w][u/d] <C31>
3 Base temp[r&w][u/d] <C32>
4 Pressure unit [u/d] <C33>
5
Process pressure[r&w][u/d]
6 Base pressure[r&w][u/d] <C35>
7 Deviation[r&w][u/d] <C36>
8 STD/Normal unit[u/d] <C37>
9 Time unit[u/d] <C40>
10 End
deg C [r&w sel](*5)
deg F
MPa abs [r&w sel](*5)
kPa abs
kg/Sqcm abs
bar abs
psia
NmlCum [r&w sel](*4)
k NmlCum
M NmlCum
NmlL
StdCum
k StdCum
M StdCum
StdL
StdCuft
k StdCuft
M Stdcuft
Now *** setting mode of thermometer. Please set at another menu.
Process abort.
to be continued to mark<*1> in a next page
F040608_2.EPS
[u/d]<C20>
<C34>
(*1)
<C30>
*** is the parameter set up at "Thermometer/Function"
This message is indicated in case of not setting up
"moniter only","Not use" at "Thermometer/Function"
[r] : read
[cr] : continuous read
[w] : write
[u/d] : upload/download data
[sel] : select
[#] : method
{ } : Only for
Option code /MV
< > : Parameter No.
in display and BRAIN
Terminal
( ) : Related parameter
N: Normal
S: Standard
To Next Page
Loading...
Need help?
General
