2. Transportation, Storage and Installation
2-2
TI 32P01J10-01EN
2.1 Precautions for Transportation
This section describes the precautions required to prevent accidents and damage
when transporting ProSafe-RS system equipment. These precautions apply when the
equipment is contained in our original packing.
Transportation
SEE
ALSO
For ambient temperature, humidity, vibration and impact, see Section 1.2, “Control Room Environment.”
Loading
• Do not load crates on top of others or turn them on their sides.
• Keep all crates upright.
• Secure loaded crates using ropes, and cover them completely with waterproof coverings.
• Do not load crates outdoors when it is raining.
Don’t Stack Outdoors
Be sure to store cargoes inside a warehouse if they must be stored for some time.
Transportation
Cargoes contain precision instruments. Select a company specializing in the transportation of
computers and precision instruments.
Keep all products upright during air transport, freightage, or truck transport. When transporting by
track, drive at low speed to avoid vibration and impact. Also, slow down to the limit on a bad road.
Others
Do not transport equipment through areas where there may be corrosive gas, intense electric or
magnetic elds.
Nov. 27, 2015-01
To Next Page
Loading...
Need help?
General
