EasyManuals Logo
Home>YOKOGAWA>Industrial Equipment>ProSafe-RS

YOKOGAWA ProSafe-RS User Manual

YOKOGAWA ProSafe-RS
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
2. Transportation, Storage and Installation
2-4
TI 32P01J10-01EN
2.3 Storage
The delivery date should be determined in accordance with your installation schedule.
Avoid storing products more than three months. If long-term storage more than three
months cannot be avoided, consult Yokogawa in advance because it is necessary to
provide waterproong, condensation prevention, and dustproong measures as well as
periodical inspections.
Storage Condition
Store products without unpacking. Be sure to conrm that the crate is not damaged. To store
them after unpacking, be sure to take the precautions described below.
Location of Storage
Store products in a warehouse or indoor facilities - never in an open-air location.
Storage Environment
Ambient Temperature for storage: 5 to 40 °C.
Avoid direct sunlight.
Prevent condensation.
Do not store products where corrosive gas or salty air may be present.
SEE
ALSO
See “Section 1.2 Control Room Environment” for permissible temperature, humidity and temperature uctuation
of storage area.
Storage of Packed Equipment
Place squared pieces of lumber with a height of 100 mm or higher on the oor. The lumber
should be long enough so that more than 100 mm remains outside of the crate on every
side.
Securely place unopened crates on the lumber platform.
Do not stack crates in piles.
Make sure to provide good air circulation in the storage area and periodically inspect the
crates to keep them under proper conditions.
Storage of Unpacked Equipment
To store unpacked products without power connection, follow the specied environmental
requirements. If stored in a non-air-conditioned room, cover them with polyethylene or other
sheets for protection against dust and moisture. For moisture-proong, place a su󰀩cient amount
of Silica gel or other desiccating agent inside the covering and inspect its e󰀨ectiveness from time
to time.
When using desiccating agent or corrosion inhibitor etc., please select the appropriate one.
Also, please make sure that it does not a󰀨ect the function and performance of the product before
actually using it.
Nov. 14, 2017-00

Other manuals for YOKOGAWA ProSafe-RS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA ProSafe-RS and is the answer not in the manual?

YOKOGAWA ProSafe-RS Specifications

General IconGeneral
BrandYOKOGAWA
ModelProSafe-RS
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals