v
TI 32P01J10-01EN
Battery
• Must use Yokogawa designated batteries.
• Mounting and changing batteries must follow the procedure in the hardware instruction
manual for each device.
• When changing batteries while the power supply is not shutdown, do not put hands inside of
the device since it is danger of electric shock.
Fan Unit
• When changing fan unit while the power supply is not shutdown, be careful not to touch other
parts so as to avoid electric shock.
SEE
ALSO
For Fan Unit, refer to 4, “Installation Specications, Parts Durability.”
Wiring I/O Cables
Wiring I/O cables must follow the procedure in this document.
SEE
ALSO
For Wiring I/O Cables, refer to 3.5, “Connecting Signal Cable.”
Connected Devices
IMPORTANT
To ensure this system’s compliance with the CSA safety standards, all devices connected to this
system shall be CSA certied devices.
Oct. 25, 2016-00
To Next Page
Loading...