EasyManuals Logo

YOKOGAWA WT332E User Manual

YOKOGAWA WT332E
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
5-11
IM WT310E-02EN
1
2
3
4
5
6
7
App
Index
External I/0 (Option)
Examples of D/A Output
Voltage
When the voltage range is set to 150 V and 150 V (the rated range value) is applied, the D/A output is
+5 V.
When 100 V is applied, the output is 100 V/150 V × 5 V = 3.3 V.
Power
When the voltage range is set to 150 V and the current range is set to 5 A, the rated power range is
150 V × 5 A = 750 W.
If the measured power value is 750 W, the D/A output is +5 V.
When the measured power value is 300 W, the output is 300 W/750 W × 5V = 2.0 V.
Three-Phase Power (WT332E/WT333E)
When the voltage range is set to 150 V, the current range is set to 5 A, and a three-phase, three-wire
systemisconnectedtoelements1and3,theratedpowerrangeofwiringunitΣwillbeasfollows.
1
(Rated power range of element 1) + (rated power range of element 3)
= 150 V × 5 A + 150 V × 5 A
=1500 W
IfthemeasuredpowervalueforΣis1500W,theD/Aoutputis+5V.
When the measured power value is 600 W, the output is 600 W/1500 W × 5V = 2.0 V.
1 ForinformationaboutthepowerrangeofwiringunitΣ,seethetableofΣfunctionexpressionson
the second page of the appendix in the User’s Manual, IM WT310E-01EN (PDF). This table shows
the expressions that the WT332E/WT333E uses to internally calculate the measured values. This
tablealsoshowshowtothinkaboutwiringunitmeasurementranges.Inthisexample,PΣinthe
table corresponds to P1 + P3 in the three-phase, three-wire (3P3W) column.
Integrated Power Values
When the voltage range is set to 150 V and the current range is set to 5 A, the rated power range is
150 V × 5 A = 750 W. In manual integration mode, when the rated integration time is set to 1 hour, the
rated electrical energy value is 750 W × 1 h = 750 Wh.
If you perform integration for 1 hour and the measured electrical energy is 750 W, the D/A output one
hour after integration starts is + 5 V.
If the measured electrical energy over 1 hour is 300 Wh, the output one hour after integration starts is
300 Wh/750 Wh × 5 V = 2.0 V.
The output 30 minutes after integration starts is 150 Wh/750 Wh × 5 V = 1.0 V.
5.3 Producing D/A Output

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA WT332E and is the answer not in the manual?

YOKOGAWA WT332E Specifications

General IconGeneral
BrandYOKOGAWA
ModelWT332E
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals