2-2
IM WT310E-02EN
When Carrying the Instrument
First, turn off the circuit under measurement and remove the measurement cables. Then, turn off the
instrument and remove the power cord and any attached cables. When carrying the instrument, use
the handle as shown in the following figure, or use both hands to hold the instrument firmly.
WT310E/WT310EH WT332E/WT333E
WARNING
• When you hold or put away the handle, be careful not to get your hand caught between the
handle and the case.
• When you carry the instrument, be careful not to get your hand caught between the wall,
installation surface, or other objects and the instrument.
French
AVERTISSEMENT
• Lorsque vous attrapez ou rabattez la poignée, veillez à ne pas vous coincer la main entre
la poignée et l’instrument.
• Lorsque vous déplacez l’instrument, veillez à ne pas vous coincer la main entre l’instrument
et le mur, la surface d’installation ou tout autre objet.
When Cleaning the Instrument
When cleaning the case or the operation panel, turn off the circuit under measurement and the
instrument and remove the instrument’s power cord from the outlet. Then, wipe the instrument
lightly with a clean dry cloth. Do not use chemicals such as benzene or thinner. Doing so may cause
discoloring and deformation.
2.1 Handling Precautions
To Next Page
Loading...
Need help?
General
