14
Refer to the subsequent sections for detailed
instructions on using these behaviors.
Introduction to FlexFob App
Settings, Continued
I
After tapping the + button to add a behavior, the
Choose a behavior screen will be displayed.
Tap to exit this screen
Tap to control a device�(e.g.
turn on a plug)
Tap to add a delay or pause
between behaviors
Tap to enable, disable or
modify an Alarm Strategy
Tap to activate a scene
Tap to send a notification
(e.g. send SMS, play
message on a SpeakerHub)
Tap to add a Filter (e.g. to
check the status of a device
before proceeding with the
next behavior)
To Next Page
Loading...
