1.The flash Awakening
Half press the multifunction button of the transmitter or the button of camera
shutter, the awakening indicator light of transmitter and receiver will be bright
(Green), at the moment if the flash is in dormant state, it will be awakened.
2.Test and trigger the flash
Fully press the multifunction button of transmitter to test the flash once. When
fully pressing the release button of camera shutter, it will synchronously trigger
the on-top flash and off-camera flash, the flash trigger indicator light of
transmitter and receiver will be bright (Red).
FIt requires compatible transmitter when using the camera shutter to awake
the flash, non specialized transmitter can also wireless trigger the flash
normally (single contact trigger).
Wireless flash trigger & testing
8
To Next Page
Loading...
Need help?
General
