Wired/wireless remote shutter release function
This product can achieve wired /wireless remote
shutter release function, need to LS-2.5 series shutter
connecting cable(or purc hase) according to the
different cameras. When using the shutter release, the
power switch need to set in”TRX” state.
1.As the picture shown, use the shutter release between the
shutter socket of camera and transceiver.
2.Single transceiver can be used as wired shutter release.
3.When using as a wireless shutter release, fix a transceiver
on the camera hot shoe or fix around the camera with the
external socket of camera shutter through specialized
shutter cable to connect, another transceiver set on hand.
4.Half press the multifunction button of transmitter, the
camera will enter into focusing. The Focusing indicator
light will bright, fully press the button, the camera will
enter into shooting, at the moment, the red shutter
indicator light bright.
9
To Next Page
Loading...
Need help?
General
