Preparation before using
7.Power Switch and Tr ansmi t-rec eive State
Settings:
Set the power switch on TX (single transmit) or TRX
(transmit-receive automatic switch) state according to
different shooting requirement. When it used as wireless
triggering transmitter and flash testing, set to "TX"; while
used as wireless triggering receiver, using shutter release or
other extended functions, set to "TRX", as the table shown,
set to OFF means turn off the power.
7
FMake sure all the transceivers have been fixed before using , the flash
need to set to manual “M” mode.
To Next Page
Loading...
