Need help?Do you have a question about the Yongnuo RF-603 II and is the answer not in the manual?
General| Type | Wireless Flash Trigger |
|---|---|
| Frequency | 2.4 GHz |
| Range | 100m |
| Channels | 16 |
| Hot Shoe | Yes |
| Battery | 2 x AAA |
| Compatibility | Canon, Nikon, Pentax, Olympus |
| Functions | Wireless flash trigger, shutter release |
| Flash Sync Speed | 1/320s |
| Weight | 50g (without battery) |
Lists all items provided within the product package.
Details accessories that can be purchased separately.
Configure transceivers to the same channel code for communication.
Instructions for correctly inserting AAA batteries into the units.
Steps to securely attach the transceiver to the camera's hot shoe.
How to mount the transceiver on a light stand or flash bracket.
Attaching and securing a flash unit onto the transceiver.
Utilizing the PC sync port for connecting studio flashes.
Setting the power switch to TX or TRX based on operational needs.
Waking up a flash from its dormant power-saving mode.
Procedures for testing flash output and triggering the flash.
Linking the camera's shutter socket to the transceiver with a cable.
Utilizing a single transceiver for wired remote shutter control.
Positioning transceivers for remote wireless shutter operation.
Using the button to achieve camera focusing and shutter release.
Using a flash attached to a transceiver for remote shooting.
Orchestrating remote shooting and flash synchronization with multiple units.
Resolving problems with testing or triggering the flash.
Solutions for when the flash fails to awaken.
Addressing issues where the camera shutter cannot be released.
To Next Page
