2.Remote shooting with flash trigger sync
Examples of using multiple combinations of RF-603II, LS-2.5mm shutter
connecting cable needs to be used, and several RF-603II transceivers needs
to be purchased.
Function extend
11
1.Install one transceiver on the hot shoe of the
camera, and connected the shutter socket
with the shutter connecting cable to the
camera.
2.Install the flash on the hot shoe of the other
transceivers, or connect to studio flash lights
with PC sync cable.
3.Handhold one transceiver as a remote control
transmitter, half press the multifunction
button of the transceiver to focus, full press
the multifunction button to remote shooting
with flashes trigger sync.
To Next Page
Loading...
Need help?
General
