Function extend
1.Handhold the flash for remote flash trigger sync
Take the RF-603II on the flash as shutter release remote control, LS-2.5mm
series shutter connecting cable needs to be used. The transceivers should
set in “TRX” state.
10
1.Install the handhold flash on the hot shoe
of the transceiver as transmitter, and lock
the flash.
2.Fixed the camera (such as on a tripod),
installed the other transceiver on the hot
shoe of the camera as receiver,and
connected with specialized shutter cable
to the external shutter socket of the
camera.
3.Press the multifunction button of the
transceiver on flash for remote shooting,
and the flash will be trigger with shutter
synchronously.
To Next Page
Loading...
Need help?
General
