Yongnuo YN560 User Manual

[UP] and [DOWN]
button and [OK]
You can make fine tune power changes by pressing these
buttons and then press [OK] to set the fine tune setting.
[－] ZOOM [＋]
button
By pressing these buttons, the head focal length of the flash
head can be cycled through (24 / 28 / 35 / 50 / 70 / 80 / 105).
[Pilot Button] Press to test the flash at the current output level.

Yongnuo YN560 Specifications

General

Zoom Range	24-105mm
Recycle Time	Approx. 3 seconds
Power Source	4 x AA batteries (alkaline or Ni-MH)
Color Temperature	5600K
Flash Modes	Multi
Swivel Angle	270 degrees
Tilt Angle	0-90 degrees
Wireless Triggering	Yes
Manual Power Levels	1/1 to 1/128