Yongnuo YN560 User Manual

5
. Test Flash
Whatever mode the flash light is in
, you can press PILOT button to test if the flash light
flashes normally.
When testing the flash, the flash will flash at the output level you have set.
6. Power saving mode
YONGNUO has designed a power saving mode for YN560. This mode is enabled
or
disabled by a long press of the [Sound Switch]. In M mode,
if the power saving mode is
enabled, the flash will enter sleep mode after 3 minutes of inactivity
in order to save
power. You can press [PILOT] or [Power Switch] to awaken the flash to resume
operation. It will automatically power down after 15 minutes of inactivity. If you disable
the power saving mode, the power saving indicator will be on. The flash won’t
as
quickly go into sleep mode after being left inactive, but it will automatic
ally shut down
after 30 minutes.

Yongnuo YN560 Specifications

General

Zoom Range	24-105mm
Recycle Time	Approx. 3 seconds
Power Source	4 x AA batteries (alkaline or Ni-MH)
Color Temperature	5600K
Flash Modes	Multi
Swivel Angle	270 degrees
Tilt Angle	0-90 degrees
Wireless Triggering	Yes
Manual Power Levels	1/1 to 1/128