Need help?Do you have a question about the Yongnuo YN560-TX PRO and is the answer not in the manual?
Power| power source | 2 AA/LR6 alkaline batteries |
|---|---|
| transmission distance | 100 m |
| manual flash power | 1/1 - 1/128 (1/3-stop increments) |
Weight and Dimensions| dimensions | 67.7 x 66.7 x 81.3 mm |
|---|---|
| weight | 110 g |
Explains E-TTL II/E-TTL autoflash mode and its parameters, including FEC and FEB.
Details manual flash mode, output settings, and firing groups.
Explains stroboscopic flash mode, flash output, frequency, and number of flashes.
Describes group firing mode, flash group settings, and output/compensation adjustments.
Instructions on how to securely attach and detach the transmitter to the camera's hot shoe.
Explains the lock function to prevent accidental changes to settings by disabling button and dial operations.
Details the built-in AF assist beam emitter for improved autofocus in low-light conditions.
Discusses optimal positioning and factors affecting the operational range for wireless flash shooting.
Explains how to set Flash Exposure Compensation (FEC) in 1/3-stop increments within ±3.
Details how to set Flash Exposure Bracketing (FEB) levels for exposure variations.
Details how to select flash groups (A-E) and set their individual flash modes (ETTL, M, OFF).
Explains setting flash output in M mode or exposure compensation in ETTL mode for each group.
Configures the auto power-off function for energy saving.
Enables or disables the modeling flash function.
Sets whether to automatically cancel FEB after three shots.
Changes the order of the FEB sequence (exposure variations).
Adjusts flash output for test flashes in ETTL mode.
Enables or disables the AF assist beam from the transmitter.
Configures the LCD panel illumination duration.
Selects the contrast level for the LCD screen.
Sets RF compatibility mode for specific receivers.
Explains how to set shutter sync modes (1st curtain, 2nd curtain, High-speed Sync).
Describes remotely setting focal lengths for compatible radio slave flashes.
Details controlling the transmitter's functions via the camera's menu screen.
Instructions for resetting all transmitter settings to default values.
Step-by-step guide for updating the transmitter's firmware via USB.
To Next Page