Yongnuo YN560-TX PRO User Manual

Introduction
1
YONGNUO YN560-TX PRO speedlite transmitter is a upgrade
version based on YN560TX II, with TTL/ high speed sync
functions, its radio protocol achieves cross-brand compatibility.
YN560-TX PRO can control, trigger YN200/YN862 series and
the models which have been upgraded to the latest firmware
such as YN622C(N) II/YN685/YN968C/YN968N(II) (in 560RX
mode) to realize ETTL/M/Multi flash, high speed sync, focal
length control functions.
Compatible with radio flash and flash trigger models such as
YONGNUO YN560III/IV/YN660/YN720/YN860Li/RF603 series
/RF605 series directly, realize M/Multi flash functions.
16 channels, up to 10,000 customizable photographer ID,
A/B/C/D/E 5 flash groups
Fully supports ETTL/M/Multi/GR flash mode.
Su pp ort s fr on t- cu rta in s yn c, s eco nd c ur tai n sy nc (M
mode),high speed sync
Supports ETTL ratio, flash exposure compensation, flash
exposure Lock, flash exposure bracketing, modeling flash
functions.
2.4G radio Maximum communication distance is over 100m.
Supports remote control focal settings of slave unit flash
(only for YONGNUO compatible flashes)
Firmware can be upgraded via USB(Micro-USB)
High resolution dot-matrix LCD, backlight for keys
Fast lock mechanism
Built-in AF assist beam emitter

Yongnuo YN560-TX PRO Specifications

Power

power source	2 AA/LR6 alkaline batteries
transmission distance	100 m
manual flash power	1/1 - 1/128 (1/3-stop increments)

Weight and Dimensions

dimensions	67.7 x 66.7 x 81.3 mm
weight	110 g