-59-
10. Reflection Flash
Bounce flash means to take photos by making flash light head aimed at wall or
shooting effect.
If the wall or ceiling is too far, the bounce flash may be too weak to get enough
11. Use Reflection Board to Take Photos
effect when the flasher head is up 90°.
12.Use Wide-angle Diffuser
arrange them as per the figure; in such case, the effect will be softer and more
natural.
ceiling and using the light reflected back from the ceiling or wall to light the desired
object, so that the shade behind the object can be decreased to get more natural
exposure. The wall or ceiling should be even and white in order to get efficient
reflection; if the reflection surface is not white, color cast may appear in photo.
With the reflection of board flash, pull out the reflection board and the wide-angle
diffusion board out from the light head at the same time and then push the
wide-angle diffusion board back. In such case, if this product is being used to
take photos, it will produce a highlighted point on
the eyes of the subject and
thus make the eyes charming (catch light).
This function can reach optimal
Pull out the wide-angle diffusion board, push back the reflection board and
To Next Page
Loading...
Need help?
General
