York R-134a - Document Overview and Nomenclature; Changeability and Associated Literature

JOHNSON CONTROLS
3
FORM 160.69-N3
ISSUE DATE: 10/30/2015
In complying with Johnson Controls’ policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at http://cgproducts.
johnsoncontrols.com.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
CHANGEABILITY OF THIS DOCUMENT
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
MANUAL DESCRIPTION FORM NUMBER
Shipping Damage Claims Policy 50.15-NM
Installation Checklist and Request for Startup Engineer 160.69-CL1
Start-Up Checklist YD Chillers 160.69-CL2
Maintenance Requirements 160.69-MR1
Field Reassembly Instructions for Form 3 and 7 Shipment - YD Mod C 160.69-NM4
Control Panel 160.69-O3
Unit Operation Manual 160.69-O4
Wiring Diagram - YD Mod A-C Field Control Modications 160.69-PW2
Wiring Diagram - YD Mod A-C Remote Starter Specication 160.69-PW4
Wiring Diagram - YD Mod C Chillers with OptiView Control Center and Electro-Mechanical Starter 160.69-PW7
Wiring Diagram - YD Mod C Chillers with OptiView Control Center and Medium Voltage Variable
Speed Drive
160.69-PW8
Wiring Diagram - YD Mod C Chillers with OptiView Control Center and Unit Mounted LVVSD or Floor
Mounted MVVSD
160.69-PW9
OptiView Renewal Parts - YD Mod A-B 160.69-RP1
Unit Renewal Parts - YD Mod A-B 160.69-RP2
J1, J2, J3, J4, J5, J7 Compressor Part Guide (with/without VGD) 160.73-RP3
ASSOCIATED LITERATURE