18
P5417090
For installing the securing plate (Only TIWM015B22S to TIWM030B22S)
Bend the pipe, place it in the bottom space on the rear side of the unit and secure the pipe to the securing
plate with band (eld-supplied).
Make sure to seal the hole in the wall completely in order to
prevent rainwater and outdoor air from entering.
When using putty for sealing, avoid contact with the wall since
it may result in oil stain.
Sealing
Sealing
Wall
Pipe
Outdoor
Indoor
Band (Field-Supplied)
Securing Plate
Make sure to cut off the unnecessary part of
band (field-supplied). (It may cause abnormal
noise or condensate dripping.)
To Next Page
Loading...
