York YCAL Series - Table 18 - Unit Keys Programming Quick Reference List

FORM 150.66-NM3
ISSUE DATE: 09/25/2020
129
JOHNSON CONTROLS
SECTION 7 - UNIT CONTROLS
7
TABLE 18 – UNIT KEYS PROGRAMMING QUICK REFERENCE LIST
Table 18 provides a quick reference list for the Unit key setpoints.
LD07405D
Options Key
(press Options Key
to adv.)
Display Language
System Switches
on/off
Chilled Liquid Type
(water or glycol)
Ambient Control
(standard or low)
Local/Remote Mode
Unit Control Mode
(Return or Leaving)
Display Units
(English or Metric)
System Lead/Lag Control
(Manual or Automatic)
Fan Control Mode
Manual Override Mode
Current Feedback Option
Soft Start Option
Unit Type
(”Chiller” MUST be Selected
Via No Jumper Installed
(Viewable Only)
Refrigerant Type
R-410A
(Programmed under Service Mode)
Viewable Only)
Power Failure Restart
Expansion Valve Type
(Programmed under Service
Mode, Viewable Only)
Must be programmed
for Thermostatic
Flash Card Update
Remote Temp Reset
Pump Control
Pump Selection
(
(Thermostatic or Electric)