York YCAL Series - ISOLATORS

FORM 150.66-NM3
ISSUE DATE: 09/25/2020
93
JOHNSON CONTROLS
SECTION 6 - TECHNICAL DATA
6
WEIGHT DISTRIBUTION AND ISOLATOR MOUNTING POSITIONS
General
Weights of specic chiller models vary signicantly as
options are added. As a result, total weights, weights at
individual isolator positions, and actual isolator selec-
tion at each position cannot be published due to the
vast number of possible combinations. This informa-
tion will be available when the specic chiller/ option
selection is made from the local Johnson Controls sales
oce. Be aware, weights will change with each op-
tion along with possible isolator changes. Weights and
isolators may need to be recalculated when the option
selections are changed.
Whenever the isolator option is ordered, the isolators
will be shipped loose with the chiller. Packed with
the isolators and also in the control panel informa-
tion packet is a drawing and table specically for each
chiller, based on the option selection. The drawing
and table will be similar to the ones shown below. The
drawing will show the isolator locations along with the
weight in pounds and kilograms at the specic loca-
tion, isolator position, and location measurements for
each isolator.
Approximate Isolator Locations
LOCATION
X DISTANCE
INCHES (MM)
Y DISTANCE
INCHES (MM)
VENDOR NUMBER OPERATING WEIGHT
R1 135.01 (3429.3) 1.09 (27.7) CIP-B-1000 / Blue 726 (329.3)
L1 9.79 (248.7) 1.09 (27.7) CIP- B-1650 / Black 1113 (504.9)
R2 135.01 (3429.3) 89.16 (2264.7) CIP-B-1000 / Blue 648 (293.9)
L2 9.79 (248.7) 89.16 (2264.7) CIP-B- 1250 / Gray 993 (450.4)
SAMPLE PRINTOUT SUPPLIED IN THE ISOLATOR PACKAGE AND IN THE CHILLER PANEL LITERATURE PACKET.
Order No: 051138540701
Line No: 1
Unit Shipping
Weight
(Display on unit
data nameplate)
kg lb
1564 3448
L1
L2
R1
R2
0
TOP VIEW
0
X
Y
ISOLATORS